background image

SpartacoGroup.com 

 800-860-6170

6

LED SCREEN

ADVANCED TOOL AND BATTERY PERFORMANCE MONITORING

The SERIES 7 tools feature newly developed PCB integrated into the tools hydraulic circuit for monitoring 

battery capacity, recording cycle count and output pressure, as well as the time, date, and location stamp. 

There is a visual display integrated into the tool housing on all “REC” and “SL” models.  This display is a 

visual for complete or incomplete tool cycle, battery status indicator, confirming GPS recorded location, 

Bluetooth connection indicator, and service alert visual LED when needed.

AUDIBLE ALERTS

The audible alerts on the tools can be turned “ON” or “OFF”. From the factory, the compression tools are set 

to be “ON” and all cutting tools are set to “OFF”. This can be changed on any tool by pressing and holding 

the “SOUND” button for 5 seconds until the battery indicator LED illuminates. The first LED indicates audible 

alerts “ON”, and by pressing the “SOUND” button again, will illuminate the second LED which will indicate 

the audible alerts “OFF” The third LED indicates “ON” for “Good” and “OFF” for “Error” – this can be toggled 

back and forth by pressing the check button until the desired audible alert status is reached. 

Flashing green LED for BLUETOOTH connection 

AND Red LED when service is needed

Green LED when GPS signal is active

Green LED indicates complete “GOOD” cycle

Red LED indicates incomplete “ERROR”

Press once to check battery capacity, 

twice to activate BLUETOOTH

ON

OFF

Audible only on complete cycle

Содержание Huskie Tools PRO LINE 7 Series

















Отзывы: