User’s Manual
42
Survey’ button, then a “Wireless Site Survey Table” will pop up. It will list all available
access points near by. You can select one access point in the table and it will join wireless
LAN through this access point.
WLAN MAC:
For some applications, you may need to designate a specific MAC address for the router.
Please enter the MAC address here. If you are connecting the router to a computer, you
can simply press ‘Clone Mac address’ button to fill the MAC address field with the MAC
address of your computer.
Setup procedure for ‘AP Bridge-Point to Point’:
In this mode, you can connect your wireless router with another, to combine two access
points and expand the scope of wireless network, and all clients (wired only – AP will not
accept wireless clients in this mode) of two wireless routers will think they’re on the same
physical network. This function is very convenient when you need to connect two networks
between two buildings. Here are instructions about how to connect two wireless routers
together:
Band:
Select the band you want to use; two wireless routers must use the same setting.
Channel
Number:
Select the channel you want to use; two wireless routers must use the same setting.
MAC address:
Input the MAC address of another wireless router.
Set Security:
Click to set security settings for this connection.
Setup procedure for ‘AP Bridge-Point to Multi-Point’:
In this mode, you can connect your wireless router with at least four wireless routers to
expand the scope of wireless network, and all clients (wired only – AP will not accept
