User’s Manual
23
To do so, please follow the following instructions:
Please click ‘System’ menu on the left of web management interface, then click ‘Remote
Management’, and the following message will be displayed on your web browser:
Host Address:
Input the IP address of the remote host you wish to initiate a management access.
Port:
You can define the port number this router should expect an incoming request. If you’re
providing a web service (default port number is 80), you should try to use other port number.
You can use the default port setting ‘8080’, or something like ‘32245’ or ‘1429’. (Any integer
between 1 and 65534)
Enabled:
Select the field to start the configuration.
When you finish, click ‘Apply’. If you want to keep original password unchanged, click
‘Cancel’.
Press ‘Continue’ to save the settings made and back to web management interface; press
‘Apply’ to save the settings made and restart the router so the settings will take effect after it
reboots.
