P0 and P2 Reading a Black Line
Hardware Hookup
Note:
If you already hooked up your sensors in Experiment 2, please skip this section.
Like the motors, you should have already hooked up the line sensors during the assembly portion of this guide.
You can go there now for the full assembly instructions. Double check to make sure that the wires are hooked up
to your line sensors correctly!
The line sensors hookup to your moto:bit via female / female jumper wires that snake through the chassis of your
robot up to the moto:bit. The sensors hookup to the moto:bit in the following order:
LEFT =>
PO
CENTER =>
P1
RIGHT =>
P2