manualshive.com logo in svg

sparkfun GPS-18443, Руководство по подключению

Поделиться
Скачать
sparkfun GPS-18443 Скачать руководство пользователя страница 19

every reading your rover makes. If you’re looking for maximum accuracy consider installing a static base with fixed
antenna. We were able to pinpoint the antenna on the top of SparkFun with an incredible ac/-2mm of
accuracy using PPP!

Bluetooth and NTRIP

The RTK Surveyor transmits full NMEA sentences over Bluetooth serial port profile (SPP) at 4Hz and 115200bps.
This means that nearly any GIS application that can receive NMEA data over serial port (almost all do) can be
used with the RTK Surveyor. As long as your device can open a serial port over Bluetooth (also known as SPP)
your device can retrieve industry standard NMEA positional data. The following steps show how to use SW Maps
but the same steps can be followed to connect any serial port based GIS application.

The best mobile app that we’ve found is the powerful, free, and easy to use 

SW Maps

 by Softwel. You’ll need an

Android phone or tablet with Bluetooth. What makes SW Maps truly powerful is its built-in NTRIP client. This is a
fancy way of saying that we’ll be showing you how to get RTCM correction data over the cellular network. If you’re
using a serial radio for your correction data, you can skip this part.

SW Maps with RTK Fix

When powered on, the RTK Surveyor will broadcast itself as either 'Surveyor Rover-BC41' or 'Surveyor Base-
BC41' depending on the position of the SETUP switch. Discover and pair with this device from your phone or
tablet. Once paired, open SW Maps.

Содержание GPS-18443


































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды