Walk-through of Chapter 4: Fade in and out! from Chibitronics on Vimeo.
Troubleshooting
If the sound animation didn’t appear, try refreshing the page and uploading again.
Check that your volume is all the way up and unmuted. You can test this by unplugging the audio cable and
see if you can hear the static (that’s your code!) when you press the upload button. If you hear the sound
then plug the audio cable back in and try uploading again.
Remember to press the PROG button on your board before you click upload so that it’s in programming
mode and the PROG light is red.
If you are having issues with your circuit or compiling code, check out the debugging tips or chapter listed in
the:
Love to Code Volume 1 for MakeCode: Debugging (PDF pg 70)
Love to Code Volume 1 for ChibiScript and Arduino: Debugging (PDF pg 68)
Still having challenges? Send us a email at [email protected].
Resources and Going Further
Thanks for trying out Chibitronics Love to Code boards. They would love your feedback to make the experience
even better! Do you have ideas or comments for us? Please send them our way at [email protected]. Happy
making!
Now that you’ve successfully got your Chibi Chip up and running, it’s time to incorporate it into your own project!
For more information related to paper circuits and the Chibi Chip, check out the resources below:
Educators: Lesson Plans & Paper Circuit Templates - Lesson plans and paper circuit templates.
How-To Tutorials - Here, you’ll find step-by-step instructions, tutorials, and videos on how to get
started with Chibitronics products.
Project Gallery - Additional tutorials and examples using Chibitronics products.
