Press the PROG button on the Chibi Chip and hold it until the PROG light blinks and stays red. This puts your
Chibi Chip into programming mode – it’ll know to listen for code!
Open your programming editor of your choice and write some code! You can either go with a block-based code
editor or text-based code editor.
Software: MakeCode
To program the Chibi Chip, there are a two options available depending on your preference. Both require an
internet connection to upload code to the microcontroller.
Block-Based Code w/ Microsoft MakeCode Online Editor
If you’re new to code, try Chibitronic's Scratch-inspired block-based code editor in Microsoft MakeCode!
