Spark SPL-RG-301B, Руководство пользователя

Страница: 9 / 14

LED Strobe Laser Light User Manual http://www.sparklaser.com
- - 8 - -
10CH for example
First
（
address 001
）
Second
（
address 011
）
Third
（
address021
）
DMX in DMX out to next light
八、
DMX address setting
Each fixture must set a specific starting address. When receiving signal transmission, fixture will
receive channel control signals which from the starting address.
According to different requirements or easy to use, the user can set many value fixtures to the same
address, also can set up a separate address for every device.
If you set the same address,all the devices will receive from DMX channels signal. All connecting
fixtures are jointly controlled, controller can't separate control a device.
If you set a different address, each device will be separate from its particular set the starting address
and begin accepting DMX512 control signal, so that more convenient separate control one device.
Using this method must be based on channel quantity of device to determine a starting address.
This light has 10 channels. When you use 10CH, you should set the starting address of the first unit
to 1, the second unit to 11(10+1), the third unit to 21 (11+10), and so on.