Spar SP-800A, Инструкция по эксплуатации

Страница: 5 / 12

INSTALLATION
The machine is supplied factory lubricated and ready
to run. It can be positioned on any substantial work surface
or bench which is capable of supporting a load of 30kg.
The transportation should require two people. Please see
Figure 1.
ELECTRICAL CONNECTION
Before connecting this machine to the electrical supply, please check the details on the rating plate
(located on the rear of the machine) corresponding to the details of your electrical connection.
The mixer is supplied with a trailing lead fitted with a molded plug. If the style of plug is unsuitable for
the socket you plan to use, the plug must be cut off and replaced with an appropriate plug.
The mixer should be plugged into a switched socket which isolates all poles and has a minimum
contact clearance of 3mm and located close to the mixer for use in an emergency and to facilitate servicing
(max.2 meters of cable).
The machine must be incorporated into a potential equalization system.
The leakage current for this appliance is no greater than 1mA/KW.
If the electrical supply cable to the machine becomes damaged, it must be replaced by a qualified
electrician using cable which is 0.75 or higher and suitable for a 1/4HP motor load.
The ground wire is fixed to the machine and this connection must be kept intact.
CAUTION:
The mixer MUST be grounded.
BEFORE USING THE MIXER
Before using the mixer, please ensure that all users are familiar with the correct operation of the
machine. In particular, care should be taken to ensure that the bowl and mixing tools are correctly fitted and
the bowl cradle is in the raised position prior to starting the machine.
SAFETY AT WORK
Never place your hand or any kitchen utensil into the bowl when the mixer is in operation.
Please isolate the machine from the electrical supply by removing the plug from the socket before
cleaning or dismantling.
A notice advising operators of the safe use of this mixer is attached to the machine.
OFFICE, SHOPS AND RAILWAY PREMISES ACT, 1963
The above Act requires that this machine and attachments shall be operated only by a properly
instructed person or by an employee who is under the supervision of a properly instructed person. The
instruction shall include indication of the possible dangers arising and the precautions to be observed. The
Act also requires that no person under the age of 18 shall clean a machine if this exposes him to risk of
injury from a moving part of that machine or any adjacent machine.