Spanset 2002436, Инструкция пользователя

Страница: 6 / 10

CLEARANCE HEIGHTS & FREE SPACE
In a fall arrest event the free space below the user is critical to the correct operation
of the equipment and safety of the user. The free space must be sufficient to allow
the fall arrest event to occur without the potential for collision with structures
of obstacles. Consideration must also be given to the proximity of the user in
relation to the anchorage to minimise the potential for a swing fall arrest where
vertical clearance may be adequate but horizontal clearance may not. Calculation
of clearance heights and swing fall risk should be performed and advised by a
competent person, or by contacting SpanSet UK Ltd.
Clearance height considerations
- Height of anchorage above working level
- Arresting distance of energy absorber
- Height & weight of the user
- Availability of free fall space
NOTE: OTHER FACTORS MUST ALSO BE CONSIDERED WHICH ARE SPECIFIC
TO PRODUCT TYPES (I.E. HARNESS STRETCH/SLIPPAGE UNDER FALL
ARREST LOAD).
ANCHORAGES
All anchor points must satisfy the requirements of EN795. Whenever possible, select
anchor points which limit the height of any potential fall i.e. above the User’s head
height. Select locations of attachment which will not allow the PPE to contact
aggressive or abrasive surfaces.
GENERAL INFORMATION
OPERATING TEMPERATURE
-35c to +75c
STORAGE OF PRODUCT
Cool well-ventilated area
Do not store under heavy items
Do not expose to UV
Prevent contact with sharp objects that may damage the fibres of the webbing
CLEANING & DRYING OF PRODUCT
Wash in a container of 30C water with mild detergent
Do not machine wash or pressure wash
Dry in a well-ventilated area allowing the product to drip dry (m30 o c)
Do not expose to sources of heat or UV
CONTAMINATION
Do not allow contact with harmful substances such as acids, alkalis, fuel, paints,
and solvents.
MODIFICATIONS
No alterations, additions or repairs should be made to this product without the
written consent of SpanSet UK Ltd.
TRANSPORTATION
During transportation, the product must be stored away from direct sunlight and in
such a manner as to avoid contamination with chemicals, dirt ingress and mechanical
damage. It is strongly recommended that the product is transported in the protective
bag supplied with the product or other suitable means.
PRODUCT LIFESPAN
It is mandatory by European Law that all PPE must be supplied with comprehensive
User Instructions which detail the lifespan of the product, and the inspection
requirements. The actual frequency of the periodic inspection is the responsibility
of the competent person in charge of the maintenance of the product. Aggressive
or arduous conditions and constant use will potentially reduce the working life of
the product and so a more frequent inspection regime will be required to effectively
monitor this. SpanSet recommend that PPE for Work at Height is thoroughly
examined by a competent person:
- Periodically at intervals not exceeding 6 months
- Interim inspections where required
SpanSet recommend that Pre Use inspection is carried out by the user before each
and every use. Any concerns about the condition of equipment must result in the
item undergoing a thorough interim inspection. In addition SpanSet give this product
a period of obsolescence of 10 years from date of manufacture, even if never used.
Products should be withdrawn from service if they meet any one of the following
criteria:
- Failure of a thorough examination
- Subjected to or Used to arrest a fall
- Manufacturers period of obsolescence (shelf-life) has been reached
Compatibility and use of PPE is the responsibility of the user.
SpanSet can supply other items of equipment that are compatible with this product
which includes; EN361 fall-arrest harnesses, a variety of EN362 connectors, work
positioning belts, and adjustable safety lines. SpanSet also supplies a full range of
fall arrest and access equipment, and training either at site or on our own premises,
in all aspects of height safety. Courses are accredited under our registration to ISO
9001, and certificates are issued on successful completion.
Although it is not compulsory, for the safety of all users SpanSet recommends you
take advantage of this training service, please contact us for further details.
SpanSet UK Ltd, Telford Way, Middlewich, Cheshire, CW10 0HX
Tel: +44(0)1606 737494
www.spanset.co.uk
EU-KONFORMITÄTSERKLÄRUNG
SpanSet UK Limited, Telford Way, Middlewich, Cheshire, CW10 0HX, Vereinigtes
Königreich.
Erklärt, dass - Scaff-Pro Harness
Sie wurden einer EU-Typprüfung gemäß Modul B der PSA-Verordnung (EU) 2016/425
unterzogen und haben nachweislich die einschlägigen Anforderungen von Anhang II
dieser Verordnung als Produkt der Kategorie III erfüllt durch:
1. Prüfung der einschlägigen technischen Unterlagen
2. Prüfung nach folgenden Normen: EN361:2002
Das Produkt ist identisch mit der PSA, die Gegenstand eines EG-Musterprüfzeugnisses
Nr. 2777 / 14245-01 / E00-00 ist, ausgestellt von: SATRA Europe, Clonee, Republik
Irland (benannte Stelle Nr. 2777)
Das Produkt unterliegt den in Modul D der PSA-Verordnung (EU) 2016/425
festgelegten Verfahren unter der Aufsicht von: BSI Group Niederlande, 1066 EP
Amsterdam, Niederlande (Notified Body No. 2797)
Die textilen Komponenten des Produkts werden aus Polyester und Nylon hergestellt.
Es ist wichtig, dass dieses Produkt mit den Anweisungen in der richtigen Sprache des
Landes, in dem das Produkt verwendet werden soll, an den Endverbraucher verkauft
wird. SpanSet empfiehlt, dass nach Möglichkeit alle PSA ein persönliches Problem
sind.
3
SCAFF-PRO
Absturzsicherungsgeschirr