Spanset 2002436, Инструкция пользователя

Страница: 5 / 10

SCAFF-PRO Harness
EU DECLARATION OF CONFORMITY
SpanSet UK Limited, Telford Way, Middlewich, Cheshire, CW10 0HX, United
Kingdom.
Declares that - Scaff-Pro Harness, Has been subject to an EU Type-Examination in
accordance with Module B of the PPE Regulation (EU) 2016/425 and has been shown
to satisfy the relevant requirements of Annex II of this Regulation as a category III
product through:
1. Examination of the relevant technical documentation
2. Testing to the following standard(s): EN361:2002
The product is identical to the PPE which is the subject of an EC Type-Examination
Certificate No. 2777/14245-01/E00-00 issued by: SATRA Europe, Clonee, Republic of
Ireland (Notified Body No. 2777)
The product is subject to the procedures set out in Module D of the PPE Regulation
(EU) 2016/425 under the supervision of: BSI Group The Netherlands, 1066 EP
Amsterdam, The Netherlands (Notified Body No. 2797)
The textile components of the product are produced from Polyester. It is essential
that this product is sold to the end-user with the instructions in the correct language
of the country in which the product is to be used. SpanSet recommends that where
possible all PPE be personal issue.
WARNING
Use of this equipment is inherently dangerous, and prior to use you must:
- Read the User Instruction Manual
- Be trained in the correct use of the product
- Familiarise yourself with the products operation & limitations
- Fully understand the risk involved in using the product
- Be physically and medically capable of operating the product safely and fully
understanding its function
All work at height activities are inherently dangerous; your personal safety is
your responsibility. Rescue provision should always be in place to deal with any
emergencies and must be able to be carried out with maximum efficiency and speed.
No alterations, additions or repairs should be made to this product without the
written consent of SpanSet UK Ltd.
FAILURE TO ADHERE TO THE PRODUCT USER INSTRUCTIONS OR USE THE
PRODUCT CORRECTLY MAY RESULT IN SERIOUS INJURY OR DEATH.
PRODUCT APPLICATION
The Scaff-Pro is an EN361 full body fall arrest harness designed for personal
fall protection. The product must not be overloaded or used outside its field of
application; personal protection for work at height. All Users must be trained in
work at height activities to a level of competency or must work under direct visual
control of a competent person prior to use of the product. Use of the product is at the
Users own risk and the User assumes responsible for any damages, injuries or death
resulting from incorrect use of the product in any manner whatsoever. If there is any
doubt about the correct use and application of this product do not use it and seek
advice from a competent person or from SpanSet UK Ltd.
PRE-USE CHECKS
Before each use check the function and condition of the product by operation of any
moving parts and inspection of the product elements with particular attention to:
Webbing - check for signs of wear, cuts, abrasion and damage due to excessive
heat or chemical contamination.
Hardware - check for signs of wear, cracks and distortion. If the hardware has
moving parts, ensure that they are free to move and operate
correctly.
Product Label - the label details must be clearly legible and checked for
compatibility for the required work at height activity. Check the
details of the product label to ensure the product is within its
operating lifespan.
BE AWARE THAT CONTINUOUS MONITORING OF YOUR EQUIPMENT
DURING USE IS CRITICAL TO ENSURING SAFE WORK AT HEIGHT
ACTIVITIES.
PRODUCT COMPATIBILITY
Always ensure, via specific training or advise from a competent person, that the
intended application of PPE is compatible with the products used. It cannot be
assumed that all combinations of PPE will interact in a safe manner.
Pay particular attention to verify connectors are positioned and closed in such a
manner that any loading of the safety system does not incorrectly load the connector
or has the potential to operate the connector gate mechanism accidentally. Always
ensure the connectors are orientated to load in the primary axis.
This harness has been recommended for use (but not exclusively) with the following
compatible elements of PPE:
EN354 - Restraint lanyard to front or rear attachment point.
EN355 - Fall arrest lanyard to front or rear attachment points.
EN358 - Work positioning systems to front or rear attachment points.
EN360 - Retractable fall arrest systems to front or rear attachment points.
FOR FURTHER DETAILS OF PPE COMPATIBILITY, PLEASE CONTACT YOUR
LOCAL SPANSET BRANCH.
ALL PPE CONNECTED INTO A SAFETY SYSTEM MUST CONFORM TO EN
STANDARDS AND BEAR THE ‘CE’ LOGO. IF IN DOUBT, SEEK ADVICE FROM
YOUR LOCAL AUTHORITY OR THE MANUFACTURER, SPANSET.
PRODUCT USE
HARNESS FITTING
Loosen the webbing at the shoulders, legs and chest adjustment buckles and put the
harness on across the shoulders
(1)
Ensure that the sub-pelvic support strap is positioned underneath the buttock then
fasten the buckles at the leg loops and coarse adjust the webbing to fit
(2 & 3) . Check
that the webbing is not twisted.
Connect the buckle at the chest and coarse adjust the shoulder webbing to fit (4) .
Check that the webbing is not twisted.
Adjust the length of the chest web to provide a comfortable but snug fit
Tighten the webbing at the legs and shoulders equally to provide a comfortable but
snug fit. If the harness fit is uncomfortable loosen off the webbing and adjust again
until the desired fitting is achieved.
Stow any loose webbing under the provided elasticated web tidies.
WARNING! FAILURE TO ADJUST THE HARNESS TO A COMFORTABLY SNUG
FIT MAY RESULT IN SERIOUS DISCOMFORT OR INJURY IN A FALL ARREST
EVENT. THE HARNESS IS DESIGNED TO PROVIDE PERSONAL PROTECTION
FOR WORKERS AT HEIGHT AND WORKS BEST WHEN FITTED AS TIGHTLY
AS COMFORT WILL ALLOW
HARNESS BUCKLES
FALL ARREST
The Scaff-Pro harness is fitted with sternal and dorsal fall arrest attachment points
and are indicated by the letter
‘A’ . Do not connect any elements of the fall arrest
system to parts of the harness other than the fall arrest attachment points.
2