background image

V.1409A 

 

    Page | 7 

Unpair / Disconnect Bluetooth Connection 

 
If you wish to unpair/disconnect the current Bluetooth connection so that a different smart 
device can be paired use the Hold & Tap function. Hold MODE (key 8) and Tap SKIP TRACK + 
(key 7) to unpair the connection.  

 
HOLD
              + TAP  

 

  

 

 
Volume Control 

 
Audio volume is a combination of the audio source volume (smart device/TV/DVD/MP3) times 
the SmartSTREAM amplifier’s volume. Where Bluetooth is the audio source, in addition the 
Bluetooth module inside the SmartSTREAM controller also contains its own volume control. All 
three volume levels need to be considered when controlling overall volume of the SmartSTREAM 
stereo system. 

 

For best audio quality both the audio source (smart device/TV/DVD/MP3) and Bluetooth module 
volumes should be set to maximum and the SmartSTREAM amplifier’s volume adjusted to suit. 
This allows the amplifier to amplify more signal than noise producing the best audio quality. 
 

DEVICE 

HOW TO ADJUST VOLUME 

Smart Device 

Volume adjusted on the smart device itself (recommend setting to maximum) 

Bluetooth Module 

Adjusted via SmartSTREAM keypad using Hold & Tap function. Hold (key 8) and Tap 

(keys 2 or 3) to increase or decrease volume (recommend setting to maximum) 

NOTE: A beep will sound when volume has reached its maximum level 

SmartSTREAM 

Amplifier 

Adjusted via single press ) and Volume(–) keys on the SmartSTREAM 

keypad.

 NOTE: A beep will sound when volume has reached its maximum level

 

 
Bluetooth Module Volume Adjustment (Increase/Decrease) 

 

HOLD              + TAP  

 

 

 

HOLD              + TAP

 

 
 

NOTE: When a Bluetooth connection is established and music is streamed for the first time the 
SmartSTREAM system will automatically increase the Bluetooth module volume to maximum. However if 
one device is unpaired and a different device is paired the Bluetooth module volume will reset to the 
minimum volume level. Each time a new device is paired it is best practice to check the Bluetooth module 
volume is set to the maximum level.  

Smart Device 

Volume 

Bluetooth 

Module 

Volume 

SmartSTREAM 

Amplifier 

Volume 

  

 

  

 

  

 

Содержание SV SmartStream





















Отзывы: