6
Ensure ground is level with playing surface, then dig pole hole.
Install threaded ends of J-bolts (19) through holes
in mounting plate (2) and secure as shown.
2
25
25
19
Install nut (25) to J-bolt (19) as shown. Repeat procedure for remaining three J-bolts (19).
XG02.EPS
CONTACT UTILITIES
BEFORE DIGGING.
WARNING!
Make sure J-bolts (19) are in the illustrated position.
Nuts on the top of plate are used for leveling the pole after
system is fully assembled.
NOTE:
1.
3.
2.
HR83001a
24" (61 cm)
36" (91.4 cm)
PLAYING
SURFACE
Check building codes for your location to
determine apropriate hole depth for cement.
NOTE:
IMPORTANT!
Make sure nuts are
2-1/2” (6.35cm) from top
of J-Bolts.
HR83002.EPS
211560
19
2.75”
(7 cm)
25
36” (91.4 cm)
24” (61 cm)
