25
12.
Roll completed assembly to desired position. Fill base with water (approx. 17 gallons
(64 Liters)) or sand (approx. 142 lbs. (53 kg)) and push the cap (27) into base (1).
203617
WARNING!
DO NOT LEAVE ASSEMBLY UNATTENDED
WHEN EMPTY; IT MAY TIP OVER.
CAUTION!
ADD TWO GALLONS (7.6 LITERS)
OF NON-TOXIC ANTIFREEZE IN
SUB-FREEZING CLIMATES.
IF USING SAND:
2 GALLONS OF
ANTI-FREEZE IS NOT REQUIRED.
NOTE:
Cap (27) MUST be tightened COMPLETELY
and SECURELY to prevent leakage.
CHECK WATER LEVEL BEFORE EACH USE!
FAILURE TO FOLLOW THIS WARNING COULD RESULT
IN SERIOUS INJURY AND/OR PROPERTY DAMAGE.
WARNING!
203617
27
1
27
Содержание 5B1044
Страница 20: ...SECTION C ATTACH THE BACKBOARD This is what your system will look like when you ve finished this section 20 ...
Страница 24: ...24 11 Install net 26 to Rim 21 as shown below OUTSIDE VIEW 26 21 B 21 D C 26 A 26 22 21 ...
Страница 46: ...46 SECCIÓN C FIJE EL TABLERO Así es como se verá su sistema cuando haya terminado esta sección ...
Страница 50: ...50 11 OUTSIDE VIEW 26 21 B 21 D C 26 A 26 22 21 Instale la red 26 en el aro 21 como se muestra a continuación ...
