Spacetronik SP-IPL07AHD, Руководство пользователя

Страница: 50 / 90

3.3.10 Data monitor
Pls click icons to enter
Click “Set” to choose the baud rate of RS485/RS232; it must be the same as the DVR or the Control
keyboard
.
The DVR or Control keyboard send the code to the tester, if it can be read, the protocol will
shown on the upper right, like Pelco D, if not, like P:---
While the tester receives the code, Press the key to empty
Though the RS485 port, display the PTZ control code of the multifunctional keyboard or the DVR.
Controller can check the status of the RS485 transmission through the code on the display. (The RS485
communication rate must be the same.)
Application
：
Check the RS485 communication states of the video optical transmitter whether normal.
Engineer can analyze the protocol and check the data through the displayed code.
3.3.11 Optical power meter
（
Optional
）
Click icons to enter ,with five wavelength 1625nm
、
1550nm
、
1490nm
、
1310nm
、
1300nm
、
850nm ,linear or nonlinear optical power display, both for optical power testing and Fiber link loss
relative measurement . It is necessary tools for installation and maintenance optical fiber
communication, cable television and CCTV security system.
Note
：
Please keep the fiber connector and the dust cap be clean, and clean the detector with the special
Page.44.