Page 4
Seaich Corporation, LLC. All rights reserved. www.seaich.com | Spacerails, LLC. www.spacerails.com
Step 1:
Interlock
all Base block tabs
as shown below.
Step 2:
Press Base Holder A and
Base Holder B pieces into the Base
blocks for a more secure hold.
Illustration of base
with tabs
locked and Base Holders installed.
Approximately 17% of actual size.
Step 1:
Slide Arm Holder B of each arm on to a shaft and lock in place with Arm
Lock. Refer to the next page for orientation and location of each arm.
SHAFT ASSEMBLY
NOTE:
Please see the included
full size
drawings
for the next several steps.
This will simplify the positioning of
the base, arms, shafts, and the rail
cut lengths.
BASE ASSEMBLY
