20
be configured with different priorities for the same primary connection.
Remote IP - it is used to filter packets from a specified host (subnet). For the uplink
filter, the remote refers to the network-side address; for the downlink filter, the remote
refers to the user-side address.
Subnet Mask - sub network mask.
Protocol Number - IP v4 protocol number or IPv6 next header, value range: 0-255; e.g.
TCP: 6, UDP: 17.
Local Port Range - the local port range; for the uplink filter, the local port refers to the
port of local host. For the downlink filter, the local port refers to the port of network
host.
Remote Port Range - the remote port range; for the uplink filter, the remote port refers
to the port of network host; for the downlink filter, the remote port refers to the port of
local host.
IPSec SPI- IP tunnel safety parameter index.
DATA->New Profile:
Fleetone terminal has several common built-in Profile configurations, and it also
supports users to establish different Primary Profile or Secondary Profile.
Figure 26 DATA->New Profile
5.6
VoIP interface
Click the “VOIP” menu to enter the VOIP value-added service setting interface. As
shown in the following figure:
