Op on B: Flexible Blade Beater V1
a. Remove beater assembly from cylinder.
b. Remove scraper blades from beater
assembly; separate scraper blade clips from
scraper blade.
c. Pull
o
ff
beater shoes.
d. Remove
drive
sha from inside cylinder
using a dry towel.
e. Separate seal from drive sha .
b
a
d
d
c
b
5. D
Op on A: Stainless Steel Beater
a. Remove beater assembly from cylinder.
b. Remove seal from beater assembly.
a
b
Op on C: Flexible Blade Beater V2
a. Remove beater assembly from cylinder.
b. Remove blades from beater assembly.
c. Remove
drive
sha s from inside cylinder
using a dry towel.
d. Separate seal from drive sha .
a
b
c
6
6. R
+
6
d
7
P
:
D
P
1. Verify power switches are in the OFF posi on.
2. Use the large brush and cool water to thoroughly
clean inside the cylinder;
be sure to scrub the back of
the cylinder
3. Thoroughly clean and dry the rear of the cylinder
with a clean, dry towel.
4. Gently clean and wipe down the outside of the
machine.
5. Carefully and thoroughly wash all parts removed
from the machine using supplied brushes, sponges,
and clean towels;
if machine has air pumps, be sure to include all air
pump parts in cleaning.
6. When cleaning the dispensing door assembly, clean
the priming ports with a small brush.
7. Carefully and thoroughly clean all gaskets and
O-rings removed from the machine;
be sure to wipe
gaskets and O-rings to remove excess lubricant.
8. Verify all parts are clean prior to re-assembling
machine.
1
4
2
5
3
6
CAUTION:
Never wash parts in a dishwasher. Always hand-wash components with nontoxic,
food-safe cleaners.
7
8
8
P
:
W
P