Form No. 43539049
Oct 2013
–7–
4C. CONTROL ARM, PILOT AND BURNER JET ASSEMBLY (Pilot Models 2A, 2B, 3 and 9 Only)
1.
Gently pull the thermocouple out and away from the pilot assembly. Take care not to crimp the capillary
portion of the thermocouple.
2. Place the bracket for the gas control arm over the canopy and secure using four (4) ¼-20 screws,
washers and nuts from the fastener kit. See Figures 5 and 5a. NOTE: Mounting the control bracket to a
34” canopy requires use of the set of holes located at the end portion of the control bracket only. See
Figure 7. Attach the gas valve to the control arm bracket using the fasteners indicated above and below
for the 2A, 2B, 3 and 9 controls.
FIGURE 5
FIGURE 5a
