Form No. 43539049
Oct 2013
–5–
4A. CERAMIC CONE AND PAN ASSEMBLY
1. Loosely attach the three (3) support braces to the burner
pan using three (3) ¼-20 screws and nuts from the fastener kit.
Align the braces with the slotted holes located in the ceramic
holder ring and slide through the upper portion of the braces.
See Figure 1. Tighten the screws and nuts.
2. Place the ceramic cone into the hole of the ceramic holder
ring.
3. Fold the center tab of each support brace over against the
ceramic cone using a screwdriver and a pair of pliers. See
Figure 2.
NOTE: BE CAREFUL NOT TO CRACK THE CERAMIC CONE.
4. Place the heat shield onto the support braces and slide
down against the folded tabs.
FIGURE 2
FIGURE 1