background image

 

Austech Industries Pty Ltd A.B.N. 19 010 548 464 

23 Iris Place, Acacia Ridge, 4110 

PO Box 715 

Archerfield Qld 4108 

Brisbane Australia 

T: (07) 3723 1500        F: (07) 3723 1555 

 

 

 

 

Limited Warranty Policy 

This Limited Warranty applies only to new products* distributed by Austech Industries Pty Ltd (“Austech Industries”).    It is a condition of this Limited 
Warranty Policy that the purchaser read the owner’s manual for the product and only use the product to the extent or for the purposes stated therein.   
The  purchaser  must  also  ensure  that  all  servicing  requirements  are  completed  as  listed  in  the  owner’s  manual  (said  servicing  is  at  the  owner’s 
expense).    We  recommend  that  all  servicing  is  completed  by  an  authorised  service  agent  and  that  records  of  said  servicing  are  retained  by  the 
purchaser as proof in the event of a warranty claim.     

 

Whilst the owner’s manual, packaging, and/or other documentation supplied with Austech Industries’ products may provide details in respect of a 
Limited  Warranty,  the  terms  set  out  herein  supersede  these  matters,  and  this  Limited  Warranty  applies  in  their  place.    This  warranty  is  no  less 
advantageous than otherwise described in such other documentation. 

 

Austech Industries agrees, subject to the terms and conditions specified below, to repair or replace at Austech Industries’ cost, the product purchased 
by you when the product does not perform in accordance with its specifications during the limited warranty period, due to any fault in manufacturing, 
materials and/or workmanship.    Austech Industries is not liable to repair or replace products that the purchaser uses in a manner that is inconsistent 
with the owner’s manual or in the circumstances set out in paragraphs 1.1 – 1.7 below. 

 

The benefits to the purchaser under this warranty are in addition to other rights and remedies under the Competition and Consumer Act 2010 (Cth). 

 

The limited warranty period, within which a defect in the product must appear, commences from the date of purchase and ceases on expiration of 
the specified term below. 

 
The Limited Warranty Period 
 

 

SP Jetwash Pump Warranty - 24 months 

 

  Torini Engines - 36 months 

 

  Accessories – 12 months 

The purchaser’s attention is drawn to the following 

1.  To the extent permitted by law and subject to this Limited Warranty, and as part of the terms of the sale of the equipment or part thereof:    Austech 

Industries  shall  not  be  liable  for  any  form  of  loss,  damage,  cost,  injury  or  harm  of  any  kind  (whether  direct,  indirect,  special  or  consequential) 
howsoever arising from the use or supply of the equipment to the purchaser. 

 
Exclusions to Limited Warranty Policy 

This Limited Warranty will not apply where the equipment or any part thereof:   

1.1 
1.2 
1.3 
1.4 

 
 
 

1.5 
1.6 
1.7 

Fails due to an accident (including liquid spillage), abuse, misuse, neglect or normal wear and tear; 
Has been used in a manner other than for which it was originally designed; 
Has been tampered with or is otherwise than as supplied by Austech Industries; 
Where any damage, malfunction or other failure of the equipment or any part thereof resulted directly or indirectly 
from  unauthorized  persons,  adjusting  or  failing  to  adjust  any  part  requiring  normal  maintenance  and  service 
(examples  include  adjustment  of  tappets,  air  filter  maintenance,  lubrication  and  tightening  of  screws  nuts  and 
bolts); 
Malfunctions due to the use of defective or incompatible accessories; 
Is damaged by lightning or thunderstorm activity; or 
Has been transported to a country where no authorised Service Agents exist. 

 

Claiming warranty 

This Limited Warranty may be claimed on in the following manner: 

2.1 

 
 
 
 

2.2 

 
 
 
 
 

2.3 

 

In  order  to  make  a  claim  under  this  Limited  Warranty,  the  purchaser  must  deliver  the  equipment  or  any  part 
thereof to an Austech Industries authorised repair agent and pay all costs of transportation and all costs incidental 
to  making  a  claim  under  this  Limited  Warranty.    The  purchaser  must  first  contact  Austech  Industries  (contact 
details described above) and request the delivery address of an Austech Industries authorised repair agent. 
The purchaser must deliver to the repair agent written reasons why the purchaser considers that the purchaser 
has a claim under this Limited Warranty and must provide all necessary details, including: 

 

The place, date and from whom the unit or part was purchased. 

 

The unit or part involved, Model and Serial Number. 

 

The defect, malfunction or failure in respect of which the claim is being made. 

 

Proof of service of the unit or part (if applicable) 

 

Proof of purchase in respect of the unit or part. 

If the Limited Warranty claim is valid, the repair agent will carry out repairs and return the product at no charge to 
the purchaser.    These repairs are limited to the Limited Warranty fault identified and as such will not include any 
other faults due to misuse, abuse, failure to maintain, fair wear and tear or the replacement of serviceable items 
such as oil, spark plugs, air filters, fuel etc. 
 

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.    You are entitled to a replacement or refund for a 
major  failure  and  for  compensation  for  any  other  reasonably  foreseeable  loss  or  damage.    You  are  also  entitled  to  have  the  goods  repaired  or 
replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. 

 

* SP Jetwash and Torini are brand names of products distributed by Austech Industries 

 

Note 

#

 Units which are failing to perform in accordance with specifications due to non-warrantable causes will be subject to freight, repair and or quote charges.

 

 

Содержание Jetwash SP250P


















Отзывы: