8
Assembly:
Unpacking Pressure Washer
•
Set carton on a rigid, flat surface. Remove all loose parts and packing. Leave pressure washer in
carton.
•
Using a box cutter carefully open the carton completely by cutting the four corners, allowing the sides to
lay flat. Leave pressure washer on carton while installing wheels and rubber feet.
Assembling the Gun/ Hose Hook
•
Fit the hooks into the position shown and
secure using the washers and nuts on the bracket.
Assembling the Wheels
•
Fit the axles into the axle ports as shown,
•
Secure the wheels to the axles
with nyloc nut and washer.
NOTE: Do not over tighten the nuts; the wheels must be able to rotate freely.
Assembling the Rubber Foot
•
Fit the rubber foot to frame as shown
with nuts and washers provided.
