SP 313DNw V, Руководство по установке, Страница: 17 / 40

Manual Settings (Confirm the SSID and Encryption key)
First, follow the procedure described on page , "Connecting the Machine via Network".
This information is required when you configure wireless LAN settings manually. It cannot be viewed using the machine.
Checking the SSID and encryption key
The SSID and encryption key for the wireless LAN access point (router) may be printed on a label affixed to the access point
(router). For details about the SSID and encryption key, refer to the access point (router) manual.
SSID :XXXXXXXXXXXXX
Encryption key :XXXXXXXXXXXXX
CVW901
Check the SSID and encryption key, and write them down on the blank space as shown.
SSID
Encryption key
Encryption type
Authentication Encryption
Open System None
WEP
Shared Key WEP
WPA-PSK CCMP(AES)
Mix Mode WPA/WPA
*
TKIP
*
CCMP (AES)
*
* Supported authentication methods are as follows:
- WPA-PSK
- WPA-PSK
- WPA/WPA mixed mode
* According to the connected device, either method is automatically selected.
The encryption level becomes increasingly stronger in the following order:
[None] [WEP] [TKIP] [CCMP(AES)]
Check that the wireless LAN router and the access point are working correctly.
Connect to the computer using the USB cable.
Remove the Ethernet cable if connected.
Turn on the printer.
Start Smart Organizing Monitor.
. On the [Start] menu, click [All Programs].
. Click [Smart Organizing Monitor].
3. Click [Smart Organizing Monitor Status].
DPH151
•


•