SP 313DNw V, Руководство по установке, Страница: 15 / 40

3
Press the WPS button on the access point within two minutes.
For details about how to use the WPS button, refer to the manual for the wireless LAN router and access point.
The name of the button may vary depending on the device you are using.
Check the result.
Connection has succeeded:
The Power indicator lights up.
Connection has failed:
All the indicators start to flash simultaneously, and after 30 seconds, only the Power indicator lights up.
Check the configurations of the wireless LAN router and the access point, and then reconnect the router and the access
point to the machine.
Configuring the Wi-Fi settings is complete.
If it is necessary to specify the subnet mask, gateway, DNS server, or proxy server, see page "How to Specify the Subnet, Gate-
way, DNS Server, and Proxy Server".
Quick and Easy Setup Using the PIN Code
First, follow the procedure described on page , "Connecting the Machine via Network".
About the WPS button and connection using a PIN code
Depending on the access point (router) used, setup may be possible using either the WPS button, a PIN code, or both meth-
ods.
To establish a connection using a PIN code, the configuration screen of the access point (router) must be displayed on the
computer.
The following operations can be performed only when a WPS connection is configured for the first time. Once a WPS connection is
configured, use Smart Organizing Monitor to configure the WPS connection again when changes are added to the access point or
other settings.
Check that the wireless LAN router and the access point are working correctly.
Open the PIN code configuration screen for the wireless LAN router or the access point on your computer.
Check that the USB and LAN cable are not connected to the machine, and then turn on the machine.
•
•


•
•

•
•
•