SP 313DNw V, Руководство по установке, Страница: 14 / 40

Wi-Fi Settings
Wireless LAN has two modes: infrastructure mode for connection through an access point and ad-hoc mode for establishing direct
connection with a wireless LAN-capable device (such as a laptop). For details about specifying Ad-hoc mode, see User Guide.
Infrastructure mode
Infrastructure mode can be specified by either of the following three methods: specifying the PIN code, pressing the WPS button,
or manually specifying the mode when the WPS button is unavailable.
Ad-hoc mode
To connect directly to a device that has a wireless LAN such as laptop, you need to configure the settings manually.
Quick and Easy Setup Using the WPS Button
First, follow the procedure described on page , "Connecting the Machine via Network".
About the WPS button and connection using a PIN code
Depending on the access point (router) used, setup may be possible using either the WPS button, a PIN code, or both meth-
ods.
To establish a connection using a PIN code, the configuration screen of the access point (router) must be displayed on the
computer.
About WPS connection security
The encryption method for the devices is automatically configured by WPS.
Security settings depend on the connection environment. Accordingly, it cannot be assumed that the configured security set-
ting is the most secure.
For details, see "Configuring the Machine Settings", User Guide and the Smart Organizing Monitor Help.
Check that the wireless LAN router and the access point are working correctly.
Check that the USB and LAN cable are not connected to the machine, and then turn on the machine.
Wait a while, and then hold the [Stop/Start] key down for two seconds or less.
The Power indicator, Alert indicator, and Toner/Paper End indicator will repeatedly flash in this order, and the machine starts to
connect in PBC method.
If you press and hold the [Stop/Start] key for more than two seconds, the PIN code will be printed.


•

•
•

•
•
•