16
Use SCROLL button to select Vehicle Info. from
Diagnostic Menu and press ENTER/EXIT button.
1.
Wait a few seconds or press ENTER/EXIT
button to continue.
If the vehicle does not support this mode,
"The selected mode is not supported!" message
shows on the display. If more than one module
is detected, you will be prompted to select a
module before test.
Use SCROLL button to select and press ENTER/EXIT button.
2.
Wait a few seconds to read vehicle information.
3. From Vehicle Info. menu, use SCROLL button
to select an available item to view and press
ENTER/EXIT button.
=============
Turn key on
With engine off!
Press [ENTER] to con.
Vehicle Info
============
1/3
Engine
Module $A4
Exit
Control Module
Reading info
- Please Wait -
Vehicle Info
==============
1/4
Vehicle ID Number
Calibration ID
Cal. Verif. Number
Exit
Vehicle Info.
=============
5/6
5) Vehicle Info
6) Exit
Diagnostic Menu
