13
1.
If you decide to erase the DTCs, use SCROLL
button to select Erase Codes from Diagnostics
Menu and press ENTER/EXIT button.
2. A warning message comes up asking for your
confirmation.
3. If you want to proceed with erasing the codes, press ENTER/EXIT button to erase.
If the codes are cleared successfully, an "Erase Done!" message shows up. If not cleared,
then an "Erase Failure. Turn Key on with Engine off!" message displays.
4. Wait a few seconds or press any key to return to Diagnostic Menu. If you do not wish to
proceed to erase the codes, then press SCROLL button to select NO and press
ENTER/EXIT. A "Command Canceled" message shows up. Press any key or wait a few
seconds to return to Diagnostic Menu.
================
3/6
1) System Status
2) Read codes
3) Erase Codes
4) I/M Readiness
Diagnostic Menu
=============
Erase trouble codes
are you sure
YES
NO
Erase Codes
