8
5. 12V Jump Start:
Jump start 12V vehicle Instruction:
Ensure t
he
Li
+
Power-bank is
at least 75% charged
.
1. Insert the blue plug of the battery lead set into the host.
2. Connect the RED clamp to the vehicle's battery positive (+) terminal and connect the
BLACK clamp to the vehicle's battery negative (-) terminal.
3. Start the vehicle
Note:
Do not hold the key
ON
for more than
3 seconds
at a time.
Warning:
If the engine does not start initially, allow the Li
+
Power-bank to rest and cool,
for at least 30 seconds before any other starting attempts.
4. Once the vehicle has started, remove jumper cable from Li
+
Power-bank and disconnect
RED and BLACK clamps from the vehicle battery terminals.
5.
Note:
Once the engine is running, be sure to allow enough time for the vehicles
alternator to restore charge to the vehicles battery before turning it off again.
Error Warnings:
When the LCD shows "
SHORT CIRCUIT
", it indicates a short circuit between the battery
clips has occurred,
When the LCD shows "
WARNING CLAMPS REVERSED
", it means that the battery clips
are connected the wrong way around. Please reconnect the battery clips correctly, RED
clamp to the vehicle's battery positive (+) terminal and connect the BLACK clamp to the
vehicle's battery negative (-) terminal.
