SOYO SY-P4-645DX DRAGON Ultra Скачать руководство пользователя страница 98

Страница: 98 / 173

The main interface of BIOS configuration utility is as below:

Menu:

It displays all items of the operating command.

Help:

It displays the illustrating information of the current selection and the
available operation prompts.

Channel Status:

It displays the status information of all devices in connection. When it
is active, users can select the device to be operated.

I. Create RAID

The following steps shall be taken to create RAID in BIOS.

1. Use the arrow key to select

1. Create RAID

2. Press

Enter

to confirm and go to next.

3. Select

1. Array Mode

in the next menu and press

Enter

4. Select the intended RAID level in the popup selection box

and press

Enter

5. Select

2. Select Disk Drives

in the menu and press

Enter

6. Select the harddisks to be used for creating the disk array

and press

Enter

to confirm.

Содержание SY-P4-645DX DRAGON Ultra














































































































































































Результаты поиска

Содержание SY-P4-645DX DRAGON Ultra

Отзывы:

SOYO SY-P4-645DX DRAGON Ultra, Руководство пользователя, Страница: 98 / 173

Результаты поиска

Содержание SY-P4-645DX DRAGON Ultra

Отзывы: