SOYO SY-P4-645DX DRAGON Ultra Скачать руководство пользователя страница 94

Страница: 94 / 173

Highpoint HPT372 Driver Installation

SY-P4-645DX DRAGON Ultra

Install driver during Windows XP installation

1. Go to “d:\raid\\hpt372\” directory, (assuming that your

CD-ROM is drive d) copy all the files and directory to a
floppy disk.

2. Booting from CD-ROM, when the

Windows XP Setup

blue

screen appear and prompt user to press F6 key to install
third party SCSI or RAID driver, please press F6 Key.

3. Press

key to specify additional devices when the

Windows

XP Setup

window appears.

4. The system will ask whether to install driver under

WinNT

under

Windows XP

, please select to install driver under

Windows XP.

5. Insert the floppy disk of driver, then press

Enter

to continue.

6. In the follow-on window of device type, please select

HPT370/HPT372 UDMA/ATA RAID Controller for
Windows XP

to continue.

7. Win XP will prompt you that a message that the driver is

newer than the default driver, press S to continue.

8. The

follow-on

interface will list the devices to be installed, in

which

HPT370/ HPT372 UDMA/ATA RAID Controller

item

should be included. (If users want to install other devices,
please operate at this time. If all devices have been
successfully installed, please go to next.)

9. Press ENTER to continue Windows XP setup.

Содержание SY-P4-645DX DRAGON Ultra














































































































































































Результаты поиска

Содержание SY-P4-645DX DRAGON Ultra

Отзывы:

SOYO SY-P4-645DX DRAGON Ultra, Руководство пользователя, Страница: 94 / 173

Результаты поиска

Содержание SY-P4-645DX DRAGON Ultra

Отзывы: