SOYO SY-6VBA 133, Руководство пользователя, Страница: 61 / 94

BIOS Setup Utility SY-6VBA 133
57
3-1.3 Power Management
PM Events Setting Description Note
Disabled Default RTC Y2K
H/W
Rollowver
Enabled Setting this item to enable will
help the system pass some Y2K
test programs that test H/W
rollover. For normal use, disable
this item, because other test
programs may fail if this item is set
to enable.
BUTTON-
ONLY Disables the Wake-Up by
Keyboard function. Default
KB Power ON
Password Enables you to wake-up the system
by entering a password at the
keyboard.
POWER ON
Function
Hot Key You can wake-up the system by
pressing the key combination of
your choice (Ctrl-F1~F12).
If [POWER ON Function] is set to [KB Power ON Password]
KB Power ON
Password Enter (your
password) Set the password that will wake-up your
system.
If [POWER ON Function] is set to [Hot Key]
Hot Key
Power On
Ctrl-F1~F12 Choose the key combination that will wake-
up the system. [Ctrl-F1 to Ctrl-F12]
Disabled Default
Modem Ring
Resume
Enabled
An input signal on the serial Ring
Indicator (RI) line (in other words,
an incoming call on the modem)
awakens the system from a soft off
state.
Disabled The system ignores the alarm. Default
RTC Alarm
Resume
Enabled Set alarm to power on the system
by the date (1-31) or time
(hh:mm:ss). If the date is set to [0],
the system will self-power on by
alarm everyday at the set time.