SY-6KE Quick Start Guide
6
Hardware Installation
Install the Mainboard
Follow the steps below in order to perform the installation of your new
SY-6KE Mainboard.
Step 1.
Install the CPU
Mark your CPU Frequency:
Record the working frequency of your CPU
that should be clearly marked on the CPU cover.
233MHz (66 x 3.5)
300MHz (66 x 4.5)
366MHz (66 x 5.5)
266MHz (66 x 4.0)
333MHz (66 x 5.0)
CPU Mount Procedure:
To mount the Pentium
®
II processor that you have
purchased separately, follow these instructions.
1
Unpack the Retention Kit
2
Position the Mainboard
3 Insert the Screws
4 Install the Supporting Base
5
Install the Retention Clip
6
Install the CPU
7
Install the Support Clip
8
Insert the Latches
9
Remember to connect the
CPU Cooling Fan to the
CPUFAN power connector on
the mainboard.
Supporting Base
Support Clip
Screws (x2)
Retention Clip
Latches (x2)
ATX Power
Heat Sink
Slot 1
CPUFAN Power
Larger Pinhole
