Hardware Setup
SY-6IZA
10
Step 3. SDRAM Memory Module Installation
This Motherboard features 3 x DIMM for 168-pin 3.3V unbuffered
DIMM modules, providing support for up to 256MB of main memory
using DIMM modules from 8MB to 128MB.
Number of
Memory Modules
DIMM 1
DIMM 2
DIMM 3
1
Double-sided
/Single-sided
Double-sided
2
Double-sided
/Single-sided
Double-sided
3
Double-sided
/Single-sided
Single-sided
Single-sided
RAM Type
SDRAM
Memory Module
Size (MB)
8/16/32/64/128 Mbytes
Note: Because DIMM 2 and 3 are shared, double-sided DIMMs can be used in
only one of the DIMMs. With single-sided DIMMs both 2 and 3 can be used.
Step 4. IDE Device Installation (HDD, CD-ROM)
This Motherboard offers two primary and secondary IDE device
connectors (IDE1, IDE2). It can support up to four high-speed HDD
or CD-ROM.
Connect one side of the 40-pin flat cable to the IDE device (HDD or
CD-ROM) and plug the other end to the primary (IDE1) or secondary
(IDE2) directionally keyed IDE connector on the Motherboard.
This Motherboard can support up to four HDDs.
