Hardware Setup
SY-6IZA
23
Note: The specification of maximum AGP bus Clock frequency
is 66.6MHz.
*
Set JP45 to pin 1-2 short when you use a FSB 100MHz CPU.
*
Set JP45 to pin 2-3 short when you use a FSB 66MHz CPU such as
300AMHz, 333MHz, 366MHz, etc.
*
Set JP45 to pin 1-2 short when you use a FSB 66MHz but want to over
clock the FSB clock to 100MHz Via ApolloPro the BIOS setting.
Step 19. Power On
You have now completed the hardware installation of your
Motherboard successfully.
1. Turn the power on
2. To enter the BIOS Setup Utility, press the <DEL> key while the
system is performing the diagnostic checks,
Note: If you have failed to enter the BIOS, wait until the boot
up sequence is completed. Then push the RESET button and
press <DEL> key again at the beginning of boot-up, during
diagnostic checks.
