SOYO Motherboard SY-6BA+ IV, Быстрый старт

Страница: 9 / 28

SY-6BA+ IV Quick Start Guide
9
Hardware Installation
Refer to the following table:
Mode JP8
66MHz FSB clock CPUs Setting
66MHz FSB clock CPUs must use this
setting
short
100MHz FSB clock CPUs Setting
Normal
open
Possible higher multiplier limit
short
Note: Shorting the jumper will tell the CPU that it is running on 66MHz, this will release more
multiplier settings on some INTEL CPUs, but will make the system operate out of its
specifications if the actual frequency is 100 MHz or higher.
Step 5.
Set the CPU Frequency
You do not need to set any jumper for the CPU frequency. Instead, CPU settings are
changed through the BIOS
[SOYO COMBO SETUP]. Please refer to Chapter 3 - Quick
BIOS Setup for details on how to set the Slot 1 processor frequency.
Step 6.
External Suspend Button (JP1)
Some cases come with a suspend button, insert the plug into JP1. In addition to this button,
the system can also enter the suspend mode through your OS.
Note:
Suspend mode only functions if your Power Management mode is APM. Make sure that the BIOS
setting for Power Management is APM. Windows 98 can be installed with ACPI Power Management
(default is APM), in this case suspend mode will not function either.
Step 7.
5V Stand-by indicator LED (LED 1)
This LED is lit whenever the 5V Standby voltage coming from the ATX powersupply is
available. If you have connected your ATX powersupply to the mains, LED 1 should be lit.
1 2
1 2
1 2