6
S ection 1. Installation
A qualified installer m ust carry out the installation.
The cooker hood should ideally be installed between 65 -75cm above
the work surface/cooker hob. DO NO T INSTALL BELO W 65cm .
The wall bracket m ust be fitted to the wall in the appropriate position
using the wall plugs and screws provided. You will need to m ark the
position of the holes onto the wall and drill three 8m m holes for the
wall plugs. It is im portant to ensure that the wall bracket is installed
perfectly level in order that the cooker hood is level once installed
(picture 2)
Connect the flexible ducting hose
(not supplied )
to the one-way
valve on the m otor and connect the other end to the wall outlet.
(picture 3)
N .B . Your installer w ill supply a suitable flexible hose
and w all outlet.
Connect the two ‘U’ shaped body sections (picture 3A).
Connect the glass to the body and secure with the four screws
provided (picture 3B).
Extend the ‘U’ shaped body sections to the required height and fix
the supplied plate to the top of the body section (picture 4). Now fit
the plate to the wall bracket (hook) using the two screws supplied
(picture 4A).
This appliance must not share the same air outlet as another
appliance, i.e. gas heating outlet.
Keep bends in the flexible ducting hose to a minimum and ensure that
it is connected direct to an outside wall outlet.
Ensure that dust and debris is cleaned up from the immediate area of
the appliance prior to it being switched on and tested for the first time.
