22
23
MAINTENANCE AND STORAGE
REPLACE THE CUTTING BLADES
WARNING!
Before replacing the cutting blades, always switch off the
machine and take off the battery pack!
RISK OF INJURY!
Cutting elements continue to rotate
after the motor is switched off. Do not try to stop the
cutting device (nylon blade) with your hands. Always let it
come to a stop by itself.
Remove the worn blade from the trimmer. To do so, hold the
rotating plate firmly, and place the blade on the holder (H2)
through the big hole (H1). And pull the blade outwards to fix it.
Do not switch the machine on with the cutting head on or
near material to be cut.
- Ensure the cutting blade is at full speed before contacting the
grass.
- Use the trimmer at an angle of approximately 15° to the
working area.
- In a controlled manner, swing the trimmer head from side to
side.
- If the grass is very long, cut it in stages rather than trying to
cut it all in one go. Do not overload your trimmer; take small
cuts, this will keep the machine operating at high speed and
improve the cutting efficiency.
H1
H2
CLEANING AND STORAGE
1. To clean the tool, remove the battery pack and use only mild
soap and a damp cloth to clean it. Do not immerse the tool
in water or spray it with a hose. Do not allow any liquid to get
inside it. Do not clean with a pressure washer.
