22
Technical data table (continued)
Technical Data
* The maximum branch thickness that can be shredded is
dependent on the type of wood and the quality of the material
being cut.
For hard wood (e.g. oak/beech branches), the maximum
branch thickness that can be shredded is less than for soft
wood (e.g. pine/spruce wood). For dry or knotted wood,
the cutting thickness may also be less.
The equipment is intended only for use in premises in which
the current bearing capacity of the network is >=100 A per
phase and which are supplied by a distribution grid with a
nominal voltage of 230/240V. If in doubt, check with your local
electricity provider to verify that your mains socket has enough
continuous current carrying capacity for this unit.
Noise and vibration values were determined according to the
standards and stipulations mentioned in the declaration of conformity.
Technical or visual modifications may be carried out during our
continuous product improvement programmes.
All dimensions, references and information of this instruction
manual are, therefore, subject to change without prior notice.
Legal claims, which are made on the basis of the instruction
manual, cannot thus be considered as valid.
