Sovema TDF-M EXT 180, Руководство по эксплуатации и обслуживанию

Страница: 10 / 45

OPERATION & MAINTENANCE MANUAL Revision 2022
_____________________________________________________________________________________
II - 6/6
Before transportation, pay particular attention to the integrity of the coupling pins
and to the presence of their safety pins
Make sure that all moving parts be firmly secured
Make sure that the lateral movement arms be closed
In case of transport on public roads, observe the traffic code of the State where the
implement is, pay particular attention to the requirements relating to the visual
signalling devices, to the overall dimensions and the admitted weight
MAINTENANCE SAFETY
Good maintenance is your responsibility. Poor maintenance is an invitation to fault
Please follow these common practices:
1. keep service area clean
2. use adequate illumination for the working place
3. make sure the electric tools are properly grounded
4. make sure the service area is properly ventilated
Before performing maintenance of implement, be sure that area is level, turn off the
engine, disengage the PTO, lower the machine, engage the brakes and remove the
ignition key
Keep all people away from the service area while performing maintenance
Always use personal protective equipment included, besides safety shoes and
protective gloves, overalls, goggles, and helmet
When replacing a mechanical part, always use original spare parts in order not to
compromise the implement and your own personal safety. SOVEMA assumes no
liability if the replacement of non original parts is performed
After servicing, be sure that all safety guards are re-installed properly
After servicing, make sure that all safety decals are reinstalled on the implement
and in good condition
If the implement is modified from the original design, no responsibility for the
manufacturer can be claimed
In case of lifting of the implement the operator have to use the lifting holes indi-
cates in this manual on “V - MAINTENANCE” section