Sovema BTH 250 Скачать руководство пользователя страница 30

INSTRUCTION MANUAL

Page 40

Revised 2013

LIMITED WARRANTY POLICY

SOVEMA S.r.l., Manufacturer of quality machinery, guarantees new Sovema machinery from the

time of delivery to the original purchaser to be free from defects in material and workmanship if

properly  set  up  and  operated  in  accordance  with  recommendations  set  forth  in  SOVEMA's

operator manual. SOVEMA's liability for any defect of accepted goods shall be limited to replacing

them, or as SOVEMA shall elect.

The original purchaser will qualify for the SOVEMA warranty only after they have completed the

warranty card in full and forwarded it to SOVEMA S.r.l. Italy or any SOVEMA branch.

SOVEMA's obligation shall terminate 12 (twelve) months after the date of purchase of the product

by  the  original  purchaser.  This  warranty  cannot  be  assigned  or  transferred  to  anyone  unless

SOVEMA's consent in writing has first been obtained. All warranty claims must be forwarded to

SOVEMA S.r.l. Italy or a SOVEMA branch within 8 (eight) days after occurrence.

The original purchaser will be responsible for and bear costs of:

A)     Normal maintenance such as greasing, maintenance of oil levels, minor adjustments, etc.

B)     Transportation of any kind of, any SOVEMA product to and from the place where

warranty work is performed.

This  warranty  shall  not  apply  to  any  machine  which  has  been  repaired  or  altered  in  any  way

outside the SOVEMA factory which affects its stability or reliability, nor which has been subject to

misuse, negligence or accident, nor to any machine that has not been operated in accordance

with SOVEMA's printed instructions, or operated beyond the company recommended capacity as

per machine.

This  warranty  shall  not  be  applicable  to  items  which  are  subject  to  the  warranties  of  their

respective  manufacturers.  Such  items  would  include  but  would  not  be  limited  to  clutches,

universal joints, knives, hydraulic components, bearings, tires, belts and other trade accessories.

This warranty shall not be applicable to items defined as normal wearing items. Such items would

include but would not be limited to belts, discs, knives, tines stone guards, tires, slip clutches,

pitman shaft, swath sticks, blades or tine holders.

The  judgement  of SOVEMA  S.r.l.  in  all  cases  of  claims  under  this  warranty  shall  be  final  and

conclusive  and  the  original  purchaser agrees  to  accept  its  decisions  about all  questions as  to

defects and/or to the exchange of any part or parts.

No Agent, Employee or Representative of SOVEMA has any authority to bind SOVEMA to any

affirmation, representation or warranty, concerning its machinery excepts as specifically set forth.

SOVEMA shall not be liable for special or consequential damages of any kind caused by any SOV-

EMA product.

Содержание BTH 250






































Отзывы: