Sovema BTH 250 Скачать руководство пользователя страница 1

Страница: 1 / 37

INSTRUCTION MANUAL

Page 1

Revised 2013

Dear Owner,

Thank you for buying a SOVEMA manufactured product.

Your new machine has been carefully designed and manufactured to give you superior

performance and dependable service, if properly operated and maintained.

You will find this machine to be rugged and reliable when matched to the suggested

horsepower operating range.

Much time has been invested in providing safety and protection. Please carefully read

this manual. It tells you how to safely and easily assemble, operate and maintain your

machine.

Be sure that you and any other operator carefully follow the

recommended safety practices at all times. Failure to do so could result in personal injury

or property damage.

Of course, should you ever have any problems or questions, please contact your local

SOVEMA dealer or contact us at the addresses or numbers indicated in this manual.

SOVEMA manufactures a variety of innovative equipment. If you are interested in

reviewing our full line, please contact us.

Thanks for your choice.

Pier Silvio Mayer

President

Содержание BTH 250






































Результаты поиска

Содержание BTH 250

Отзывы:

Бренды по названию

Популярные бренды

Sovema BTH 250, Руководство пользователя

Результаты поиска

Содержание BTH 250

Отзывы:

Бренды по названию

Популярные бренды