8
THE DANDY LEVELER
ASSEMBLY
The UD Dandy Leveler is shipped with the spring and handle detached, to assemble the unit,
follow the instructions below.
1. Assembling the spring
• Engage the caster stoppers to keep the lift stationary. (Fig. 1)
• Pull the Lock Pin out. Once removed, raise the machine so the lower leg roller rolls past the
Locking Pin hole. Insert the Lock Pin back into the Lock Pin hole. The scissors are now locked
in the raised position because the Locking Pin is holding the lower leg roller up. (Fig. 2)
• Spring shaft pin, washer and Pin R are removed. (Fig. 3)
• Left turns the steering wheel. Match the sticker with Load adjustment sticker. (UDLV-150:150kg,
UDLV-500:500kg) (Fig. 4)
• Insert Spring shaft pin in Spring holder (Upper) and fix it with Washer and Pin R.
• Lifting the platform again and pull lock pin. After roller passes, insert lock pin, scissors become
free. (Fig. 2)
• Fix UD Handle with Spring washer, Toothed lock washer and Nut.
This assembly should be done by two people.
C A U T I O N :
• The Lock pin functions as a stopper when it is placed on the outside of the roller. The stopper
has no function on the inside of the roller.
• When assembling the unit, be sure to place the Lock pin on the outside of the roller to prevent
accidents.
Figure 1
Figure 2
Figure 4
Figure 3
