PLM 250 — POWERED DANDY LIFT
9
Figure 4. Labels and Precautionary Markings
LABELS AND
PRECAUTIONARY
MARKINGS
#1
2986306 – Danger
#2
2998429 – SOUTHWORTH
#4
2998433 – 500 lb Capacity
#5
5904642 – SOUTHWORTH
#6
2986968 – Name Plate
MONTHLY MAINTENANCE
1) Check all welds, making sure they are
intact, no cracks or broken spots.
2) Turn the PLM 250 on its side and check
that the caster bolts are tight. If the
caster with the direction lock requires
tightening, engage the direction lock
and ensure that the castor is pointing
straight ahead before tightening.
3) Check that the cotter pins on the
actuator pivot bolts are in place.
4) Inspect the cable and plug for signs of
damage.
5) Inspect the battery control box
assembly for obvious signs of abuse.
6) Use a clean rag to wipe the paths along
which the rollers travel.
7) Lubricate (WD-40) pivots and roller
pins.
ANNUALLY OR 3000 CYCLES
1) Dismantle.
2) Lubricate (WD-40) pivots and roller
pins.
3) Clean.
4) Reassemble.
TROUBLE
SHOOTING
The PLM 250 should provide years of
trouble-free service. However, in the event
you experience difficulties with the PLM
250, the troubleshooting chart on page 8
may help you identify the problem.
You may, of course, contact Southworth’s
Customer Service Dept. at 1-800-743-1000.
