14
PALLETPAL SPRING OWNER'S MANUAL
Troubleshooting
Troubleshooting Check List
Problem
Possible Cause
Check This
The unit lowers too easily (too
early).
The spring combination may be too
weak for the load.
Check the spring ratings.
See Table 1 on page 7.
The unit does not lower
enough (too late).
The spring combination may be too
strong for the load.
Check the spring ratings.
See Table 1 on page 7.
The top of the unit rotates
away from you.
The frame of the unit may not be level.
Move the unit to a level sur-
face or install the optional
adjusting feet.
The top of the unit bounces.
The shock absorber may be damaged.
Check for leaks or dents.
Replace if damaged.
Excessive “rumble” when the
ring rotates
Wear or lack of lubrication to bearings
under rotating ring.
Remove turntable, lubricate
or replace bearings.
Wear or metal flaking from un
-
derside of rotating ring.
Normal condition caused by work-hard-
ening of metal.
No repair necessary. This
will stop once the rotator ring
wears in.
