background image

OPERATOR SAFETY INSTRUCTIONS 

IMPORTANT 

Read and understand this instruction 

manual prior to operating or performing 

maintenance on this lift! 

Prior to each use of the unit, check all 
moving parts and wire rope to ensure that 
they are in proper operating condition. 

If a unit has visible damage or does not 
transfer up and down smoothly during 
pre-operation, 

do not use the unit. 

Wire rope (cable) must have a minimum 
of four complete wraps around the winch 
drum. 

1. INSPECT THE EQUIPMENT

If cable is kinked, worn, frayed, damaged, 
or has anything on it that would obstruct 
its rotation around the pulley wheels, 

do 

not use the unit!

 

Use only Sumner Manufacturing replace-
ment parts.  Anything else will severely 
compromise the quality and safety 
designed into this lift. 

7514 Alabonson Road 

Houston, TX  77088 

281-999-6900 

 281-999-6966 (fax)

Each unit should have a complete set of 
decals and a legible Operators Manual.  
Contact Sumner if any of these items are 
missing. 

WARNING 

No riders are allowed on this lift.  This is 
not a personnel lift and never should be 
used for hoisting or moving people. 

Содержание SUMNER 784760





















Отзывы: