5. Lifting and Lowering Loads
Use the winch to crank forks up or down
into the desired position. Then crank
winch handles up about 1/4 turn to set the
safety brake.
Any unstable load must be
balanced
and
secured
to the forks prior to lifting.
Turn winch crank clockwise to elevate the
load, while watching for overhead obstruc-
tions.
After load is removed from the forks, lower
masts by turning winch crank counter
clockwise.
Lock caster brakes when leaving unit
unattended.
6. Storing Forks
Using two hands, pull out on the two
spring-loaded rings located above the fork
arms. Slide the fork assembly up off of the
carriage while pulling out the rings. The
fork can be placed behind the lift for stor-
age.
Lift may be stored in the upright, compact
position.
9
CAUTION
Make sure the floor surface is level.
WARNING
No riders allowed on this unit. This is
not a personnel lift and never should
be used for hoisting or moving people.
Lifting
Lowering
