• Do not use in dangerous environment. Do not use power tools in
damp or wet locations, or expose them to rain. Keep work area
well lighted.
• Do not immerse the pendant switch in water or any other liquid.
3
IMPORTANT SAFETY INFORMATION
4
IMPORTANT SAFETY INFORMATION
FAILURE TO OBSERVE THESE WARNINGS COULD RESULT
IN SEVERE INJURY OR DEATH.
WARNING
This symbol is used to call your attention to hazards or unsafe
practices which could result in an injury or property damage. The
signal word, difined below, indicates the severity of the hazard. The
message after the signal word provides in formation for preventing
or avoiding the hazard.
DANGER
WARNING
CAUTION
WARNING
：
• Inspect the power cord before use. Repair of replace the cord if
damaged.
• Connect the power cord to a 120 volt, 20 amp receptacle on a
ground fault protected circuit only. Refer to “Grounding
Instructions”.
• Do not modify the power cord or plug.
• Disconnet the unit from power before servicing.
- Immediate hazards which, if not avoided,
WILL result in severe injury or death.
- Hazards which, if not avoided, COULD
result in severe injury or death.
- Hazards or unsafe practices which, if not
avoided, MAY result in injury or property damage.
FAILURE TO OBSERVE THESE WARNINGS COULD
RESULT IN SEVERE INJURY OR DEATH.
WARNING
• Read and understand all instructions and safety information in
this manual before operating or servicing this tool.
FAILURE TO OBSERVE THESE WARNINGS COULD
RESULT IN SEVERE INJURY OR DEATH.
• Do not use this tool in a hazardous environment. Hazards include
flammable liquids, gases, or other materials. Using this tool in a
hazardous environment can result in a fire or explosion.
FAILURE TO OBSERVE THESE WARNINGS WILL RESULT
IN SEVERE INJURY OR DEATH.
DANGER
Electric Shock Hazard
