5
6
• Always use safety glasses. Everyday glasses only have impact
resistant lenses; they are NOT safety glasses. When using in
dusty environment, use face or dust mask.
IMPORTANT SAFETY INFORMATION
IMPORTANT SAFETY INFORMATION
FAILURE TO WEAR EYE PROTECTION COULD RESULT IN
SERIOUS EYE INJURY FROM FLYING DEBRIS.
WARNING
• For continued protection against risk or fire and electric shock,
replace ONLY with same manufacturer, type, and rating of fuse.
Refer to the “ Maintenance” section of this manual.
FAILURE TO OBSERVE THIS WARNING COULD RESULT
IN SEVERE INJURY OR DEATH.
WARNING
• Reduce the risk of unintentional starting. Make sure switch is in
off position before plugging in.
• Never leave tool running unattended. Turn power off. Do not
leave tool until it comes to a complete stop.
• Disconnect tools before servicing and when changing
accessories such as shoes, rollers, and the like. Accidental
start-up could result in serious injury.
FAILURE TO OBSERVE THESE WARNINGS COULD
RESULT IN SEVERE INJURY OR DEATH.
WARNING
• Never stand on tool. Serious injury could occur if the tool is
tipped.
• Do not overreach. Keep proper footing and balance at all times.
FAILURE TO OBSERVE THESE WARNINGS COULD
RESULT IN SEVERE INJURY OR DEATH.
WARNING
• Keep hands away from bending shoe, rollers, and conduit when
bender is in use.
• Support conduit when unloading. Conduit can become loose
and fall if not properly supported.
FAILURE TO OBSERVE THESE WARNINGS COULD
RESULT IN SEVERE INJURY OR DEATH.
WARNING:
• Keep guards in place and in working order.
• Remove any tools from bender before operating. Form habit of
checking to see that all tools are removed from bender before
turning it on.
FAILURE TO OBSERVE THESE WARNINGS COULD
RESULT IN SEVERE INJURY OR DEATH.
WARNING
Pinch Points
