Southwire 16040T, Руководство по эксплуатации

Страница: 7 / 28

10 A
16040T
MAX
MIN
MODE
11
Operation cont.
1. Set the rotary function switch to the position.
2. Press the
MODE
button until the “ “ symbol appears
on the LCD display.
3. Insert the black test lead into the
COM input jack and
the red test lead into the
Ω
input jack.
4. Touch the test lead probes to the diode under test.
5. Forward voltage will indicate 0.4 to
0.7 on the LCD display. Reverse
voltage will indicate “OL”. Shorted
devices will indicate near 0 and
an open device will indicate “OL”
in both polarities.
Diode Test
Never test diodes in a live circuit.
WARNING:
Red Black Black Red
Probe Probe Probe Probe
Forward test Reverse test
1. Set the rotary function switch to the
position.
2. Press the
MODE
button until the “
Ω
”
symbol appears on the display.
3. Insert the black test lead into the
COM
input jack and the red test lead into
the
Ω
input jack.
4. Touch the test lead probes to the component
under test. If the component is installed in a
circuit, it is best to disconnect one side before
testing to eliminate interference with other devices.
5. Read the resistance in on the LCD display.
Resistance Measurements
Never test resistance on a live circuit
WARNING:
Ω
10 A
16040T
MAX
MIN
MODE
10 A
16040T
MAX
MIN
MODE
10 A
16040T
MAX
MIN
MODE
10 A
16040T
MAX
MIN
MODE
12
Operation cont.
1. Set the rotary function switch to
the position
2. Press the MODE button until
the “ nF ” symbol appears on
the display.
3. Insert the black test lead into the
COM input jack and the red test
lead into the
Ω
input jack.
4. Touch the test lead probes to the
capacitor under test.
5. Read the capacitance value on the LCD display.
It may take up to a minute to get a stable reading
on large capacitors.
Capacitance Measurements
Safely discharge capacitors before
taking capacitance measurements.
WARNING:
1. Set the rotary function switch to
the position.
2. Press the MODE button until
the “ ” symbol appears on the
LCD display.
3. Insert the black test lead into the
COM
input jack and the red test
lead into the
Ω
input jack.
4. Touch the test lead probes to the
device or wire under test.
5. A beeper will sound if the resistance is approximately
50 Ω or less and the resistance value will be shown
on the LCD display.
Continuity
WIRE
Never test continuity on a live circuit.
WARNING:
10 A
16040T
MAX
MIN
MODE
10 A
16040T
MAX
MIN
MODE