MAX
MIN
n m VA F M k
AUTO HOLD MAX MIN REL LOZ
0
10
20
30
40
13
Operation cont.
1. Set the rotary function switch to the
position.
2. Press the MODE button until the “ “ symbol appears
on the LCD display.
3. Insert the black test lead into the
COM
input jack and
the red test lead into the
Ω
input jack.
4. Touch the test lead probes to the diode under test.
5. Forward voltage will indicate
0.4 to 0.7 on the display. Reverse
voltage will indicate “
OL
”. Shorted
devices will indicate near 0 and
an open device will indicate “
OL
”
in both polarities.
Diode Test
Never test diodes in a live circuit
WARNING:
Red Black Black Red
Probe Probe Probe Probe
Forward test Reverse test
1. Set the rotary function switch to
the
position.
2. Press the
MODE
button until
the “ ” symbol appears on the
LCD display.
3. Insert the black test lead into the
COM
input jack and the red test
lead into the
Ω
input jack.
4. Touch the test lead probes to the
device or wire under test.
5. A beeper will sound if the resistance is approximately
50
Ω
or less and the resistance value will be shown
on the LCD display.
Continuity
Never test continuity on a live circuit.
WARNING:
MAX
MIN
n m VA F M k
AUTO HOLD MAX MIN REL LOZ
0
10
20
30
40
MAX
MIN
n m VA F M k
AUTO HOLD MAX MIN REL LOZ
0
10
20
30
40
MAX
MIN
n m VA F M k
AUTO HOLD MAX MIN REL LOZ
0
10
20
30
40
14
Operation cont.
1. Set the rotary function switch to
the position
2. Insert the black test lead into the
COM
input jack and the red test
lead into the
Ω
input jack.
3. Press the
MODE
button until the
“
nF
” symbol appears on the LCD
display.
4. Touch the test lead probes to the
capacitor under test.
5. Read the capacitance value on the LCD
display. It may take up to a minute to
get a stable reading on large capacitors.
Capacitance Measurements
Safely discharge capacitors before
taking capacitance measurements.
WARNING:
MAX
MIN
n m VA F M k
AUTO HOLD MAX MIN REL LOZ
0
10
20
30
40
